D-Link DWS-1008 Cli Reference Manual page 295

DWS-1008 CLI Reference Guide
crypto generate self-signed
Generates a self-signed certificate for either an administrative certificate for use with an EAP
certificate for use with 802.1X wireless users.
Syntax: crypto generate self-signed {eap}
eap
After type the command, you are prompted for the following variables:
Country Name
string
State Name
string
Locality Name
string
Organizational
Name string
Organizational (Optional) Specify the name of the organizational unit, in up Unit to 80
string
Common Name
string
Email Address
string
Unstructured
Name string
Defaults: None
Usage: To use this command, you must already have generated a public-private encryption
key pair with the crypto generate key command.
D-Link Systems, Inc.
Generates an EAP certificate to authenticate the switch to
802.1X supplicants (clients).
(Optional) Specify the abbreviation for the country in which
the switch is operating, in 2 alphanumeric characters with no
spaces.
(Optional) Specify the abbreviation for the name of the state, in 2
alphanumeric characters with no spaces.
(Optional) Specify the name of the locality, in up to 80
alphanumeric characters with no spaces.
(Optional) Specify the name of the organization, in up to
80 alphanumeric characters with no spaces.
alphanumeric characters with no spaces.
Specify a unique name for the switch, in up to
80 alphanumeric characters with no spaces. Use a fully qualified
name if such names are supported on your network. This field is
required.
(Optional) Specify your email address, in up to 80 alphanumeric
characters with no spaces.
(Optional) Specify any name, in up to 80 alphanumeric
characters with no spaces.
Access: Enabled
Cryptography Commands
294