D-Link DWS-1008 Cli Reference Manual page 84

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008:
Table of Contents

Advertisement

DWS-1008 CLI Reference Guide
set snmp profile (continued)
D-Link Systems, Inc.
• MPBootTraps - Generated when an access point boots.
• MPTimeoutTraps - Generated when an access point fails to
respond to the DWS-1008 switch.
• PoEFailTraps - Generated when a serious PoE problem, such
as a short circuit, occurs.
• RFDetectAdhocUserTraps - Generated when MSS detects
an ad-hoc user.
• RFDetectRogueAPTraps - Generated when MSS detects a
rogue access point.
• RFDetectRogueDisappearTraps - Generated when a rogue
access point is no longer being detected.
• RFDetectClientViaRogueWiredAPTraps - Generated when
MSS detects, on the wired part of the network, the MAC
address of a wireless client associated with a third-party AP.
• RFDetectDoSPortTraps - Generated when MSS detects
an associate request flood, reassociate request flood, or
disassociate request flood.
• RFDetectDoSTraps - Generated when MSS detects a DoS
attack other than an associate request flood, reassociate
request flood, or disassociate request flood.
• RFDetectInterferingRogueAPTraps - Generated when an
interfering device is detected.
• RFDetectInterferingRogueDisappearTraps - Generated
when an interfering device is no longer detected.
• RFDetectClientViaRogueWiredAPTraps - Generated when
MSS detects, on the wired part of the network, the MAC
address of a wireless client associated with a third-party AP.
• RFDetectDoSPortTraps - Generated when MSS detects
an associate request flood, reassociate request flood, or
disassociate request flood.
IP Services Commands
83

Advertisement

Table of Contents
loading

Table of Contents