D-Link DWS-1008 Cli Reference Manual page 356

DWS-1008 CLI Reference Guide
DWS-1008# copy testconfig tftp://10.1.1.1/testconfig
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
DWS-1008# delete testconfig
success: file deleted.
Examples: The following command deletes file dang_doc from subdirectory dang:
DWS-1008# delete dang/dang_doc
success: file deleted.
dir
Displays a list of the files in nonvolatile storage and temporary files.
Syntax: dir [subdirname]
subdirname
Defaults: None.
Access: Enabled.
Examples: The following command displays the files in the root directory:
DWS-1008# dir
=============================================================
file:
Filename
file:configuration
file:configuration.txt
file:dangcfg
dangdir/
old/
Total:
=============================================================
Boot:
Filename
*boot0:bload
*boot0:mx030000.020
boot1:mx030000.020
Boot0: Total:
Boot1: Total:
=============================================================
temporary files:
Filename
Total:
Total: 15 Kbytes used, 90941 Kbytes free
D-Link Systems, Inc.
Subdirectory name. If you specify a subdirectory
name, the command lists the files in that
subdirectory. Otherwise, the command lists
the files in the root directory and also lists the
subdirectories.
32 Kbytes used, 207824 Kbytes free
8928 Kbytes used, 3312 Kbytes free
8197 Kbytes used, 4060 Kbytes free
0 bytes used, 93537 Kbytes free
Size Created
17 KB May 21 2004, 18:20:53
379 bytes May 09 2004, 18:55:17
13 KB May 16 2004, 18:30:44
512 bytes May 16 2004, 17:23:44
512 bytes Sep 23 2003, 21:58:48
Size Created
746 KB May 09 2004, 19:02:16
8182 KB May 09 2004, 18:58:16
8197 KB May 21 2004, 18:01:02
Size Created
File Management Commands
355