D-Link DWS-1008 Cli Reference Manual page 334

DWS-1008 CLI Reference Guide
Field
Client MAC MAC address of the session user.
GID
State
now on
from
Field
Global Id
D-Link Systems, Inc.
Additional show sessions network verbose Output
Description
Global session ID, a unique session number.
Status of the session:
• AUTH, ASSOC REQ—Client is being associated by
the 802.1X protocol.
• AUTH AND ASSOC—Client is being associated by the
802.1X protocol, and the user is being authenticated.
• AUTHORIZING—User has been authenticated (for
example, by the 802.1X protocol and an AAA method),
and is entering AAA authorization.
• AUTHORIZED—User has been authorized by an AAA
method.
• ACTIVE—User's AAA attributes have been applied,
and the user is active on the network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the switch a disassociate
message.
• STATUS UPDATED—Switch is receiving a final update
from an access point about the user, who has roamed
away.
• WIRED AUTH'ING—User is being authenticated by
the 802.1X protocol on a wired authentication port.
• KILLING—User's session is being cleared, because of
802.1X authentication failure, entry of a clear command,
or some other event.
IP address and port and radio numbers of the session's
current switch, the MAC address of the access point, and the
last update time.
IP address and port and radio numbers of the session's
previous switch, the MAC address of the access point, and
the last update time. Up to six roaming events are tracked in
this display.
show sessions network session-id Output
Description
A unique session identifier.
Session Management Commands
333