Show Igmp Statistics - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Field
VLAN
Session
Port
Receiver-IP
Receiver-MAC
TTL

show igmp statistics

Displays IGMP statistics.
Syntax: show igmp statistics
vlan vlan-id VLAN name or number. If you do not specify
Defaults: None.
Access: All.
Examples: The following command displays IGMP statistics for VLAN orange:
DWS-1008# show igmp statistics vlan orange
IGMP statistics for vlan orange:
IGMP message type
-----------------
General-Queries
GS-Queries
Report V1
Report V2
D-Link Systems, Inc.
Output for show igmp receiver-table
Description
VLAN that contains the multicast receiver
ports. Ports are listed separately for each
VLAN.
IP address of the multicast group being
received.
Physical port through which the switch can
reach the receiver.
IP address of the receiver.
MAC address of the receiver.
Number of seconds before this entry ages
out if the switch does not receive a group
membership message from the receiver.
For static multicast receiver entries, the
TTL value is undef. Static multicast receiver
entries do not age out.
vlan vlan-id
[
a VLAN, MSS displays IGMP statistics for all
VLANs.
Received
--------
0
0
0
5
]
Transmitted Dropped
----------- -------
0 0
0 0
0 0
1 4
IGMP Snooping Commands
267