D-Link DWS-1008 Cli Reference Manual page 222

DWS-1008 CLI Reference Guide
Field
-----------------------------------------------------------------------------------------------------------------------
Channel
-----------------------------------------------------------------------------------------------------------------------
Neighbor BSS/MAC
-----------------------------------------------------------------------------------------------------------------------
RSSI
show dap connection
Displays the system IP address of the switch that has the active data connection for a
Distributed AP.
Syntax:
dap-num
serial-id serial-ID
Defaults:
Access:
Usage:
Examples:
configured on this switch that have active connections:
DWS-1008# show dap connection
Total number of entries: 2
DAP Serial Id
2 112233
4 0333000298 10.10.3.34
The following command displays connection information specifically for a Distributed
D-Link Systems, Inc.
Description
Channel on which the BSSID is detected.
BSSID detected by the radio.
Received signal strength indication (RSSI), in decibels referred
to 1 milliwatt (dBm). A higher value indicates a stronger signal.
show dap connection [dap-num | serial-id serial-ID]
Number of a Distributed AP for which to display information
about its active connection.
DWL-8220AP access point serial ID.
None.
Enabled.
The serial-id parameter displays the active connection for the specified
Distributed AP even if that DWL-8220AP is not configured on this
switch. If you instead use the command with the dap-num parameter or
without a parameter, connection information is displayed only for Distributed
DWL-8220APs that are configured on this switch.
If a Distributed AP is configured on this switch but does not have an active
connection, the command does not display information for the DWL-8220AP.
To show configured Distributed APs regardless of connection status, use the
show dap global command.
The following command displays information for all Distributed APs
DAP IP Address
10.10.2.27
Switch IP Address
10.3.8.111
10.3.8.111
Access Point Commands
221