D-Link DWS-1008 Cli Reference Manual page 109

DWS-1008 CLI Reference Guide
show snmp notify profile
Displays SNMP notification profiles.
Syntax: show snmp notify profile
Defaults: None
Access: Enabled
Examples: To display notification profiles, use the following command:
DWS-1008# show snmp notify profile
Notify profiles: default
notify profile use cnt=0
notify status for profile:
LINKDOWN, drop
LINKUP, drop
AUTHENTICATION, drop
DEVFAIL, drop
DEVOKAY, drop
POEFAIL, drop
MPTIMEOUT, drop
MPBOOT, drop
MOBDOMJOIN, drop
MOBDOMTIMEOUT, drop
MIKEMICFAIL, drop
ROGUEDETECT, drop
RFDETECTADHOCUSER, drop
RFDETECTROGUEDISAPPEAR, drop
CLIENTAUTHENFAIL, drop
CLIENTAUTHORFAIL, drop
CLIENTASSOCFAIL, drop
CLIENTDEASSOC, drop
CLIENTROAMING, drop
AUTOTUNERADIOPOWERCHANGE, drop
AUTOTUNERADIOCHANNELCHANGE, drop
COUNTERMEASURESTART, drop
COUNTERMEASURESTOP, drop
CLIENTDOT1XFAIL, drop
CLIENTCLEARED, drop
CLIENTAUTHORSUC, drop
RFDSPOOFMACAP, drop
RFDSPOOFSSIDAP, drop
RFDDETECTDOS, drop
RFDCLNTROGUEWAP, drop
RFDINTROGUEAP, drop
RFDINTROGUEDISAP, drop
RFDUNAUTHORSSID, drop
RFDUNAUTHOROUI, drop
RFDUNAUTHORAP, drop
DAPCONNWARN, drop
RFDDETECTDOSPORT, drop
D-Link Systems, Inc.
The command lists settings separately for each notification
profile.The use count indicates how many notification targets
use the profile. For each notification type, the command lists
whether MSS sends notifications of that type to the targets
that use the notification profile.
IP Services Commands
108