D-Link DWS-1008 Cli Reference Manual page 257

DWS-1008 CLI Reference Guide
Examples: The following command changes the other-querier-present interval on VLAN
DWS-1008# set igmp oqi 200 vlan orange
success: change accepted.
set igmp proxy-report
Disables or reenables proxy reporting by a switch on one VLAN or all VLANs.
Syntax: set igmp proxy-report {enable | disable} [vlan vlan-id]
enable
disable
vlan vlan-id VLAN name or number. If you do not specify a
Defaults: Proxy reporting is enabled on all VLANs by default.
Access: Enabled.
Usage: Proxy reporting reduces multicast overhead by sending only one membership
report for a group to the multicast routers and discarding other membership
reports for the same group. If you disable proxy reporting, the switch
sends all membership reports to the routers, including multiple reports for the
same group.
Examples: The following example disables proxy reporting on VLAN orange:
DWS-1008# set igmp proxy-report disable vlan orange
success: change accepted.
set igmp qi
Changes the IGMP query interval timer on one VLAN or all VLANs on a switch.
Syntax: set igmp qi seconds [vlan vlan-id]
qi seconds
D-Link Systems, Inc.
orange to 200 seconds:
Enables proxy reporting.
Disables proxy reporting.
VLAN, proxy reporting is disabled or reenabled
on all VLANs.
Number of seconds that elapse between general
queries sent by the switch when the switch is the
querier for the subnet. You can specify a value
from 1 through 65,535.
IGMP Snooping Commands
256