D-Link DWS-1008 Cli Reference Manual page 394
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
Syntax: dir [c: | d: | e: | f: | boot0 | boot1]
c:
d:
e:
f:
boot0
boot1
Defaults: None.
Access: Boot prompt.
Usage: To display the system image software versions, use the fver command. This
command does not list the boot code versions. To display the boot code versions,
use the version command.
Examples: The following command displays all the boot code and system image files on a
boot> dir
Internal Compact Flash Directory (Primary):
010101.020
BLOAD
BSTRAP
Internal Compact Flash Directory (Secondary):
010101.020
fver
Displays the version of a system image file installed in a specific location on a switch.
Syntax: fver {c: | d: | e: | f: | boot0: | boot1:} [filename]
c:
d:
e:
D-Link Systems, Inc.
Nonvolatile storage area containing boot partition
0 (primary).
Nonvolatile storage area containing boot partition
1 (secondary).
Primary partition of the flash card in the flash
card slot.
Secondary partition of the flash card in the flash
card slot.
Boot partition 0.
Boot partition 1.
switch:
5523634 bytes
696176 bytes
38056 bytes
5524593 bytes
Nonvolatile storage area containing boot partition 0
(primary).
Nonvolatile storage area containing boot partition 1
(secondary).
Primary partition of the flash card in the flash card
slot.
Boot Prompt Commands
393
Advertisement
Table of Contents
