D-Link DWS-1008 Cli Reference Manual page 224

DWS-1008 CLI Reference Guide
DWS-1008# show dap global
Total number of entries: 8
DAP Serial Id
1 11223344
.- 11223344
2 332211
.- 332211
17 0322100185 10.3.8.111
.- 0322100185 10.4.3.2
18 0321500120 10.3.8.111
.- 0321500120 10.4.3.2
The table describes the fields in this display.
Field
-----------------------------------------------------------------------------------------------------------------------
DAP
-----------------------------------------------------------------------------------------------------------------------
Serial Id
-----------------------------------------------------------------------------------------------------------------------
Switch IP Address
-----------------------------------------------------------------------------------------------------------------------
Bias
show dap unconfigured
Displays Distributed APs that are physically connected to the network but that are not
configured on any switches.
Syntax:
Defaults:
Access:
D-Link Systems, Inc.
Switch IP Address Bias
10.3.8.111
10.4.3.2
10.3.8.111
10.4.3.2
Description
Connection ID you assigned to the Distributed AP.
Note: DAP numbers are listed only for Distributed APs configured
on this switch. If the field contains a hyphen ( -), the Distributed AP
configuration displayed in the row of output is on another switch.
Serial ID of the Distributed AP.
System IP address of the switch on which the Distributed AP is
configured. A separate row of output is displayed for each switch on
which the Distributed AP is configured.
Bias of the switch for the Distributed AP:
•High
•Low
show dap unconfigured
None.
Enabled.
HIGH
LOW
LOW
HIGH
HIGH
LOW
LOW
HIGH
Access Point Commands
223