Clear Spantree Statistics; Set Spantree - D-Link DWS-1008 Cli Reference Manual
8 port 10/100 wireless switch with power over ethernet
Hide thumbs
Also See for DWS-1008:
- Cli reference manual (531 pages) ,
- Product manual (502 pages) ,
- User manual (454 pages)
Table of Contents
Advertisement
DWS-1008 CLI Reference Guide
Defaults: None.
Access: Enabled.
Usage: MSS does not change a port's priority for VLANs other than the one(s) you
specify.
Examples: The following command resets the STP priority for port 5 in VLAN avocado:
DWS-1008# clear spantree portvlanpri 5 vlan avocado
success: change accepted.
clear spantree statistics
Clears STP statistics counters for a network port or ports and resets them to 0.
Syntax:
port-list
vlan vlan-id
Defaults: None.
Access: Enabled.
Examples: The following command clears STP statistics counters for ports 1, and 4
DWS-1008# clear spantree statistics 1,4-6
success: change accepted.
set spantree
Enables or disables STP on one VLAN or all VLANs configured on a switch.
Syntax: set spantree
enable
disable
all
D-Link Systems, Inc.
clear spantree statistics port-list
List of ports. Statistics counters are reset on the
specified ports.
VLAN name or number. MSS resets statistics
counters for only the specified VLAN.
through 6, for all VLANs:
enable
disable} [{all
{
|
Enables STP.
Disables STP.
Enables or disables STP on all VLANs.
vlan vlan-id
[
]
vlan vlan-id | port port-list vlan-id}]
|
STP Commands
232
Advertisement
Table of Contents
