D-Link DWS-1008 Cli Reference Manual page 42

DWS-1008 CLI Reference Guide
show port-group
Displays port group information.
Syntax: show port-group [all | name group-name]
all
name group-name Displays information for the specified port group.
Defaults: None
Access: All
Examples: The following command displays the configuration of port group server2:
DWS-1008# show port-group name server2
Port group: server2 is up
Ports: 1, 3
The table below describes the fields in the show port-group output.
Field
Port group
Ports
show port poe
Displays status information for ports on which Power over Ethernet (PoE) is enabled.
Syntax: show port poe [port-list]
port-list
for all ports.
Defaults: None
Access: All
D-Link Systems, Inc.
Displays information for all port groups.
Description
Name and state (enabled or disabled) of the port group.
Ports contained in the port group.
List of physical ports. If you do not specify a port list, PoE information is displayed
Port Commands
41