D-Link DWS-1008 Cli Reference Manual page 357

DWS-1008 CLI Reference Guide
The following command displays the files in the old subdirectory:
DWS-1008# dir old
=============================================================
file:
Filename
file:configuration.txt
file:configuration.xml
Total:
The table below describes the fields in the dir output.
Output for dir
Field
Filename
Size
Created
Total
load config
Loads configuration commands from a file and replaces the switch's running configuration
with the commands in the loaded file.
Syntax: load config [url]
url
Defaults: The default file location is nonvolatile storage.
D-Link Systems, Inc.
27 Kbytes used, 207824 Kbytes free
Description
Filename or subdirectory name.
For files, the directory name is shown in front of the filename
(for example, file:configuration). The file: directory is the root
directory.
For subdirectories, a forward slash is shown at the end of the
subdirectory name (for example, old/ ).
In the boot partitions list (Boot:), an asterisk (*) indicates the
boot partition from which the currently running image was
loaded and the image filename.
Size in Kbytes or bytes.
System time and date when the file was created or copied onto
the switch.
Number of kilobytes in use to store files and the number that
are still free.
Filename. Specify between 1 and 128
alphanumeric characters, with no spaces.
If the file is in a subdirectory, specify the
subdirectory name, followed by a forward slash,
in front of the filename. For example: backup_
configs/config_c.
Size Created
3541 bytes Sep 22 2003, 22:55:44
24 KB Sep 22 2003, 22:55:44
File Management Commands
356