D-Link DWS-1008 Cli Reference Manual page 229

8 port 10/100 wireless switch with power over ethernet
Hide thumbs Also See for DWS-1008:
Table of Contents

Advertisement

DWS-1008 CLI Reference Guide
Field
-----------------------------------------------------------------------------------------------------------------------
ssid-name
-----------------------------------------------------------------------------------------------------------------------
ssid-type
-----------------------------------------------------------------------------------------------------------------------
beacon
-----------------------------------------------------------------------------------------------------------------------
auth-fallthru
-----------------------------------------------------------------------------------------------------------------------
WEP Key 1 value
-----------------------------------------------------------------------------------------------------------------------
WEP Key 2 value
-----------------------------------------------------------------------------------------------------------------------
WEP Key 3 value State of static WEP key number 3:
-----------------------------------------------------------------------------------------------------------------------
WEP Key 4 value State of static WEP key number 4:
-----------------------------------------------------------------------------------------------------------------------
WEP Unicast Index
-----------------------------------------------------------------------------------------------------------------------
WEP Multicast Index
-----------------------------------------------------------------------------------------------------------------------
D-Link Systems, Inc.
Description
Service set identifier (SSID) managed by this service profile.
SSID type:
crypto - Wireless traffic for the SSID is encrypted.
clear - Wireless traffic for the SSID is unencrypted.
Indicates whether the radio sends beacons, to advertise the
SSID:
no
yes
Secondary (fallthru) encryption type when a user tries to
authenticate but the switch managing the radio does
not have an authentication rule with a userglob that matches
the username.
last-resort - Automatically authenticates the user and
allows access to the SSID requested by the user, without
requiring a username and password.
none - Denies authentication and prohibits the user from
accessing the SSID.
State of static WEP key number 1. Radios can use this key to
encrypt traffic with static Wired-Equivalent Privacy (WEP):
none - The key is not configured.
preset - The key is configured.
Note: The WEP parameters apply to traffic only on the
encrypted SSID.
State of static WEP key number 2:
none - The key is not configured.
preset - The key is configured.
none - The key is not configured.
preset - The key is configured.
none - The key is not configured.
preset - The key is configured.
Index of the static WEP key used to encrypt unicast traffic on an
encrypted SSID.
Index of the static WEP key used to encrypt multicast traffic on
an encrypted SSID.
Access Point Commands
228

Advertisement

Table of Contents
loading

Table of Contents