D-Link DWS-1008 Cli Reference Manual page 241

DWS-1008 CLI Reference Guide
vlan vlan-id VLAN name or number. If you do not specify
active
Defaults: None.
Access: All.
Examples: The following command displays STP information for VLAN default:
DWS-1008# show spantree vlan default
VLAN 1
Spanning tree mode
Spanning tree type
Spanning tree enabled
Designated Root
Designated Root Priority
Designated Root Path Cost
Designated Root Port
Root Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Bridge ID MAC ADDR
Bridge ID Priority
Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Port
------------------------------------------------------------------------------
1
2
3
4
5
6
7
8
D-Link Systems, Inc.
a VLAN, MSS displays STP information for all
VLANs.
Displays information for only the active
(forwarding) ports.
PVST+
IEEE
00-02-4a-70-49-f7
32768
19
1
00-0b-0e-02-76-f7
32768
Vlan Port-State
1 Forwarding
1 Disabled 19 128
1 Disabled 19 128
1 Disabled 19 128
1 Disabled 19 128
1 Disabled 19 128
1 Disabled 19 128
1 Disabled 19 128
Cost Prio Portfast
19 128 Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
STP Commands
240