Reset System - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
DWS-1008# dir
=============================================================
file:
Filename
file:configuration
file:configuration.txt
corp2/
corp_a/
file:dangcfg
dangdir/
old/
Total:
=============================================================
Boot:
Filename
*boot0:bload
*boot0:030000.020
boot1:030000.020
Boot0: Total:
Boot1: Total:
=============================================================
temporary files:
Filename
Total:

reset system

Restarts a DWS-1008 switch and reboots the software.
Syntax: reset system [force]
force
Defaults: None.
Access: Enabled.
Usage: If you do not use the force option, the command first compares the running
configuration to the configuration file. If the running configuration and configuration
file do not match, MSS does not restart the switch but instead displays a message
advising you to either save the configuration changes or use the force option.
Examples: The following command restarts a switch that does not have any
D-Link Systems, Inc.
33 Kbytes used, 207822 Kbytes free
8928 Kbytes used, 3312 Kbytes free
8197 Kbytes used, 4060 Kbytes free
0 bytes used, 93537 Kbytes free
Immediately restarts the system and reboots,
without comparing the running configuration to
the configuration file.
unsaved configuration changes:
Size Created
17 KB May 21 2004, 18:20:53
379 bytes May 09 2004, 18:55:17
512 bytes May 21 2004, 19:22:09
512 bytes May 21 2004, 19:15:48
13 KB May 16 2004, 18:30:44
512 bytes May 16 2004, 17:23:44
512 bytes Sep 23 2003, 21:58:48
Size Created
746 KB May 09 2004, 19:02:16
8182 KB May 09 2004, 18:58:16
8197 KB May 21 2004, 18:01:02
Size Created
File Management Commands
358