D-Link DWS-1008 Cli Reference Manual page 206

DWS-1008 CLI Reference Guide
port-list
dap-num
radio 1
radio 2
Defaults:
Access:
Usage:
Examples:
DWS-1008# show ap config 2
Port 2: AP model: DWL-8220AP, POE: enable, bias: high,
name: DWL-8220AP02 boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default auto-tune
max-power: default, min-client-rate: 5.5, max-retransmissions: 10 Radio 2: type: 802.11a,
mode: disabled, channel: 36 tx pwr: 1, profile: default auto-tune
max-power: default, min-client-rate: 24, max-retransmissions: 10
Examples:
DWS-1008# show dap config 1
Dap 1: serial-id: 12345678, AP model: DWL-8220AP, bias: high, name: DAP01
fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3 boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default auto-tune
max-power: default, min-client-rate: 5.5, max-retransmissions: 10 Radio 2: type: 802.11a,
mode: disabled, channel: 36 tx pwr: 1, profile: default auto-tune max-power: default,
min-client-rate: 24, max-retransmissions: 10
Output for show ap config:
Field
Port
D-Link Systems, Inc.
List of ports connected to the DWL-8220AP access point(s) for which to
display configuration settings.
Number of a Distributed AP for which to display configuration settings.
Shows configuration information for radio 1.
Shows configuration information for radio 2. (This option does not apply to
single-radio models.)
None
Enabled
MSS lists information separately for each DWL-8220AP access point.
The following example shows configuration information for a DWL-8220AP
access point on port 2:
The following example shows configuration information for a Distributed AP
access point configured on connection 1:
Description
Port number.
Note: This field is applicable only if the DWL-8220AP is directly
connected to the switch and the switch's port is configured as an
DWL-8220AP access port.
Access Point Commands
205