Display Pim Routing-Table - 3Com 5500G-EI Command Reference Manual

270 C 7: U M
HAPTER SING
display pim
routing-table
P C
ULTICAST ROTOCOL OMMANDS
View
All Views
Parameter
interface-type interface-number
to specify the interface.
Description
Use the
display pim neighbor
Example
<SW5500>display pim neighbor
Neighbor Address
8.8.8.6
Table 48 Output description about PIM neighbors
Field
Neighbor Address
Interface
Uptime
Expires
Syntax
display pim routing-table [ { { *g [
mask-length | mask
mask } ] ] } | {
source-address
incoming-interface {
null } | { dense-mode | sparse-mode } ] *
View
All views
Parameter
(*, *, RP) route entry.
**rp:
(*, G) route entry.
*g:
group-address:
source-address
incoming-interface:
Description
Use the

display pim routing-table

routing table.
Related command:
: Interface type and interface number, used
to view the PIM neighbor information.
Interface Name
VLAN-interface10 1637
Description
Neighbor address
Interface where the neighbor has been discovered
Time passed since the multicast group has been discovered
Specifies when the member will be removed from the group
} ] ] | **rp [
group-address [ mask {
[ mask { mask-length | mask
interface-type interface-num | interface-name
Address of the multicast group.
IP address of the multicast source.
:
Router entry with the specified incoming interface.
display multicast routing-table
Uptime Expires
89
group-address
rp-address
[ mask {
mask-length | mask
} ] } * } |
to view the contents of the PIM multicast
.
[ mask {
mask-length |
} ] |
|