Port Panel And Management Panel; Overview; Figure 1: Ptx1000 Port Panel And Management Panel; Table 3: Maximum Supported Ports At Each Interface Speed - Juniper PTX1000 Hardware Manual

Table 3: Maximum Supported Ports at Each Interface Speed

Interface Type
10-Gigabit Ethernet
40-Gigabit Ethernet
100-Gigabit Ethernet
Copyright © 2018, Juniper Networks, Inc.
Always-on infrastructure base—The PTX1000 is engineered with full hardware
redundancy for cooling, power supplies, and forwarding, allowing service providers to
meet stringent service-level agreements across the core.

Port Panel and Management Panel

The port panel of the PTX1000 contains 72 network ports and port LEDs. The management
panel of the PTX1000 contains console and management ports, a reset button, system
status LEDs, clocking ports, and a USB port.
panel and management panel.

Figure 1: PTX1000 Port Panel and Management Panel

1— Port panel
Each of the 72 network ports on the port panel supports quad small form-factor pluggable
plus (QSFP+) transceivers, and is configured as a channelized 4 x 10-Gigabit Ethernet
interface by default (for a maximum of 288 10-Gigabit Ethernet ports). You can configure
each of the 72 ports as a 40-Gigabit Ethernet interface. You can also configure 24 of the
72 network ports as 100-Gigabit Ethernet interfaces.
maximum number of ports for each interface type supported by the PTX1000.
NOTE: You can purchase a licensed model of the PTX1000 that allows you
to use 18 of the 72 network ports. You can use 18 ports in any combination,
for a maximum of 72 10-Gigabit Ethernet interfaces, 18 40-Gigabit Ethernet
interfaces, or 6 100-Gigabit Ethernet interfaces. You can purchase additional
licenses to enable the remaining network ports. Each license enables an
additional 18 of the 72 total network ports.
Figure 1 on page 19 shows the PTX1000 port
2— Management panel
Table 3 on page 19
Maximum Supported Ports
288
72
24
Chapter 1: Overview
describes the
19