Ricoh D104 Field Service Manual page 1116

3. Appendix: SP Mode Tables
bit 0
3
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
398
Show "Collate Type", "Staple Type" and "Punch
Type" buttons on the operation panel.
If enabled, users will be able to configure a Collate Type, Staple Type, and Punch Type
from the operation panel. The available types will depend on the device and configured
options.
After enabling the function, the settings will appear under:
"User Tools > Printer Features > System"
Multiple copies if a paper size or type mismatch
occurs
If a paper size or type mismatch occurs during the printing of multiple copies, only a
single copy is output by default. Using this BitSw, the device can be configured to print
all copies even if a paper mismatch occurs.
DFU
[PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to determine whether a
job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
Increase max number of the stored jobs to 1000
jobs.
Enable: Changes the maximum number of jobs that can be stored on the HDD via Job
Type settings to 1000. The default is 100.
Face-up output
Enable: All print jobs will be output face-up in the destination tray.
Method for determining the image rotation for the
edge to bind on.
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
Disable Enable
0: Disable
1: Enable
(Single
(Multiple copy)
copy)
- -
Pattern3 Pattern1
Disable Enable (1000)
(100)
Disable Enable
0: Disable 1: Enable