Ricoh D104 Field Service Manual page 1071

• The Fax application does not allow finely-adjusted resolution settings so no count is done for the Fax
application.
8 381 T:Total PrtPGS
8 382 C:Total PrtPGS
8 383 F:Total PrtPGS
8 384 P:Total PrtPGS
8 385 S:Total PrtPGS
8 386 L:Total PrtPGS
8 387 O:Total PrtPGS
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted as
2.
• When several documents are merged for a print job, the number of pages stored are counted for the
application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following pages
are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
- Test prints for machine image adjustment.
- Error notification reports.
- Partially printed pages as the result of a copier jam.
LSize PrtPGS
These SPs count pages printed on paper sizes A3/DLT and larger.
8 391
Note: In addition to being displayed in the SMC Report, these counters are also displayed
in the User Tools display on the copy machine.
*CTL
These SPs count the number of pages printed by the
*CTL
customer. The counter for the application used for
storing the pages increments.
*CTL
[0 to 9999999/ 0 / 1]
*CTL
The L: counter counts the number of pages stored from
within the document server mode screen at the
*CTL
operation panel. Pages stored with the Store File
button from within the Copy mode screen go to the C:
*CTL
counter.
*CTL
*CTL [0 to 9999999/ 0 / 1]
System SP8-xxx
3
353