Ricoh D104 Field Service Manual page 1087

• When sending the same message to more than one place using broadcasting, the pages are only
counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes
up by 10, not 20.)
8 691 T:TX PGS/LS
8 692 C:TX PGS/LS
8 693 F:TX PGS/LS
8 694 P:TX PGS/LS
8 695 S:TX PGS/LS
8 696 L:TX PGS/LS
• Print jobs done with Web Image Monitor and Desk Top Binder are added to the count.
• If several documents are merged for sending, the number of pages stored are counted for the
application that stored them.
• When several documents are sent by a Fax broadcast, the F: count is done for the number of pages
sent to each destination.
TX PGS/Port
These SPs count the number of pages sent by the physical port used to send them. For
8 701
example, if a 3-page original is sent to 4 destinations via ISDN G4, the count for ISDN
(G3, G4) is 12.
8 701 1 PSTN-1
8 701 2 PSTN-2
8 701 3 PSTN-3
8 701 4 ISDN (G3,G4)
8 701 5 Network
8 711 T:Scan PGS/Comp
S:Scan PGS/Comp
8 715
These SPs count the number of pages sent by each compression mode.
8 715 1 JPEG/JPEG2000
*CTL
These SPs count the number of pages sent from the
document server. The counter for the application that
*CTL
was used to store the pages is incremented.
*CTL [0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from
*CTL
within the document server mode screen at the
operation panel. Pages stored with the Store File
*CTL
button from within the Copy mode screen go to the C:
counter.
*CTL
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
System SP8-xxx
3
369