Ricoh D104 Field Service Manual page 1066

3. Appendix: SP Mode Tables
• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the
L: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
ADF Org Feeds
8 221
These SPs count the number of pages fed through the ADF for front and back side
scanning.
3
8 221 1 Front
8 221 2 Back
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also, the
pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
8 231
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
8 231 1 Large Volume
8 231 2 SADF
8 231 3 Mixed Size
8 231 4 Custom Size
8 231 5 Platen
8 231 6 Mixed 1side/2side
348
*CTL
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
the same as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is
the same as the number of pages fed for duplex rear-side scanning.
*CTL
Selectable. Large copy jobs that cannot be loaded in the
ADF at one time.
Selectable. Feeding pages one by one through the ADF.
Selectable. Select "Mixed Sizes" on the operation panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original
directly on the platen.
Simplex and Duplex mode.
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]