Run (Run) Mode Menu - Omron ZW-7000 Series User Manual

System Width of input
setting signal filter
[SYSTEM [FLT.WDT]
Key lock
(cont'd)
[LOCK]
Zero reset
MEMORY
[ZER.MEM]
TIMING/
RESET key
[KEY.IN]
Controller
information
[C.INFO]
Sensor head
information
[H.INFO]
*1. For more detail, refer to the following.
2-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor User's Manual for Communications Settings
(Cat. No.Z363).
*2. "- - - - - -" is displayed when the cumulative energization time flag written in the backup ROM is OFF.

RUN (run) Mode Menu

Setting [DISPLAY]
Task for displayed target [DISP]
HIGH threshold value [H.JUDGE] Sysmac Studio: -999.99 to 999.999
LOW threshold value [L.JUDGE]
Decimal point digit [DEC.NUM]
196
Search from Menu Tree
input
Option/Setting Range [DISPLAY]
TASK1/TASK2/TASK3/TASK4
Sysmac Studio:-999.999999 to 999.999999
Sysmac Studio: -999.99 to 999.999
Sysmac Studio: -999.999999 to 999.999999
0[0DIG]/1 [1DIG]/2 [2DIG]/3 [3DIG]/4 [4DIG]/5 [5DIG]
Setting Option/Setting Range
5 μs[5US]/10 μs[10US]/20 μs[20US]/
Width of input
50 μs[50US]/100 μs[100US]*/
signal filter
200 μs[200US]/500 μs[500US]/
[FLT.WDT]
1000 μs[1000US]
Key lock
Off [OFF]*/On [ON]
[LOCK]
Zero reset
memory Off [OFF]*/On [ON]
[ZER.MEM]
TIMING/
RESET key
OFF [OFF]*/ON [ON]
input
[KEY.IN]
Software
version Displays the version.
[VER]
MAC Address
Displays the current MAC address.
[MAC.ADR]
Error history
Clears/displays the error history.
[ERR.LOG]
Error history
No.01 to No.64
display
(default value: No.01)
[LOG.DSP]
Error clear
[LOG.CLR] OK [OK]/Cancel [CAN]
Energization
*2
time (h) Energization time (h)
[RUN.TIM]
Model
Displays the model.
[MODEL]
Serial No.
Displays the serial No..
[SER.NO]
Pages
*1
p.243
p.233
p.227
p.242
−
−
−
p.178
p.242
Pages
p.204
p.205
p.205
p.204
ZW-7000/5000
User's Manual