Communication Example - Omron FZ3 Series User Manual

Setting item
Address setting
Obtain an IP address automatically
●
[Use the following IP address]
●
IP address
Subnet mask
Default gateway
DNS server
Input/Output setting
Input mode
Input form
Output IP address
Input/Output port No.
3.
Tap [OK].
The settings are confirmed and the Ethernet window closes.

Communication Example

This section introduces methods for outputting logging image files using Internet browsers.
When actually performing this operation, it is necessary to create software for extracting data.
1.
Input the controller IP address in the Internet browser.
(The controller default IP address 10.5.5.100 is used as an example here.)
The folders within the controller are displayed.
FZ3 User's Manual
Set value
[Factory
default]
Set the IP address of the controller.
When "Obtain an IP address
automatically" is selected, the IP
address of the controller will be
automatically obtained.
When "Use the following IP address"
is selected, set the IP address, subnet
mask, and the default gateway
address.
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the controller IP address.
c: 0 to 255
d: 0 to 255
[10.5.5.100]
0.0.0.0 to
255.255.255.255 Input the subnet mask address.
[255.255.255.0]
0.0.0.1 to
255.255.255.254 Input the default gateway address.
[10.5.5.110]
a.b.c.d
a: 1 to 223
b: 0 to 255
Input the DNS server address.
c: 0 to 255
d: 0 to 255
[10.5.5.1]
[Normal] This item cannot be changed.
[ASCII] This item cannot be changed.
a.b.c.d
a: 1 to 223
b: 0 to 255 Input the output destination IP
c: 0 to 255 address.
d: 0 to 255
[0.0.0.0]
0 to 65535 Set the port No. to use for data I/O
[9600] with the controller.
Externally Outputting Data through FTP
Description
193
6