Component Names And Functions - Omron F400 Setup Manual

Component Names and Functions

2-1

Component Names and Functions

The following diagram shows the terminals, connectors, and indicators on the F400
Vision Mate Controller.
1. POWER
indicator
11. RS-232C
connector
1.
POWER Indicator
Lit while power is ON.
2.
Ground Terminal
Wired to the ground.
3.
Power Supply Terminals
Wired to the power supply.
4.
Output Terminals
Wired to external devices, such as
synchronous sensors or outputs to
a PLC.
5.
Input Terminals
Wired to external devices, such as
synchronous sensors or inputs
from a PLC.
6
4. Output
3. Power
supply
2. Ground
terminals
terminal
8. Camera
connector
9. ERROR
indicator
10. RUN
indicator
terminals
5. Input
terminals
4. Output ter-
minals
Do not open.
6.
Monitor Connector
Connects to the video monitor.
7.
Console Connector
Connects to the Console.
8.
Camera Connector
Connects to the Camera.
9.
ERROR Indicator
Lit when an error occurs.
10.
RUN Indicator
Lit in RUN mode.
11.
RS-232C Connector
Connects the F400 to a computer,
PLC or other external device.
Section 2-1
6. Monitor
connector
7. Console
connector