DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show 802.1 default_priority
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DGS-3700-12:5#show 802.1p default_priority
Command: show 802.1p default_priority
Port
Priority
----
-----------
1
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
9
0
10
0
11
0
12
0
DGS-3700-12:5#
enable hol_prevention
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable HOL prevention:
DGS-3700-12:5#enable hol_prevention
Command: enable hol_prevention
Success.
DGS-3700-12:5#
disable hol_prevention
Purpose
Syntax
Description
an incoming, untagged packet before being forwarded to its destination.
show 802.1p default_priority {<portlist>}
This command is used to display the currently configured 802.1p priority value that
will be assigned to an incoming, untagged packet before being forwarded to its
destination.
<portlist> − Specifies a port or range of ports to be configured.
None.
Effective Priority
------------------
Used to enable the HOL prevention state.
enable hol_prevention
This command enables the HOL prevention function on the switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable HOL prevention.
disable hol_prevention
This command disables the HOL prevention function on the switch.
0
0
0
0
0
0
0
0
0
0
0
0
Page | 351