D-Link DGS-3700 Series Reference Manual page 22

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show local_loopback
Syntax
Description
Parameters
Restrictions
Example usage:
To show loop-back configuration:
DGS-3700-12:5#show local_loopback ports 1-9
Command: show local_loopback ports 1-9
Port Loopback Mode
------ ---------------------
1 None
2 None
3 None
4 None
5 None
6 None
7 None
8 None
9 Internal PHY Fiber
DGS-3700-12:5#
show local_loopback ports {<portlist>}
This command is used to display local loop-back configurations on the Switch.
ports [<portlist> | all] – The port(s) to be set.
None.
Page | 22