Show Acct_Client; Config Accounting Service - D-Link DGS-3700 Series Reference Manual

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

show acct_client

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display account client information:
DGS-3700-12:5#show acct_client
Command: show acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses
radiusAcctClientIdentifier
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
CTRL+C ESC q Quit

config accounting service

Purpose
Syntax
Description
Parameters
Restrictions
Used to display account client information.
show acct_client
This command is used to display account client information
None.
None.
SPACE n Next Page
Used to configure the state of the specified RADIUS accounting service.
config accounting service [network | shell | system] (1) state [enable|disable]
This command is used to enable or disable the specified RADIUS accounting service.
network − Accounting service for 802.1X port access control.
By default, the service is disabled.
shell − Accounting service for shell events:
When user login or logout the switch (via the console, Telnet, or SSH) and when
timeout occurs, accounting information will be collected and sent to RADIUS
server.
By default, the service is disabled.
system − Accounting service for system events: reset, reboot.
By default, the service is disabled.
enable − Enable the specified accounting service.
disable − Disable the specified accounting service.
Only Administrator and Operator-level users can issue this command.
0
0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
p Previous Page r
Page | 402
Refresh