D-Link DGS-3700 Series Reference Manual page 478

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config wac user
Description
Parameters
Restrictions
Example usage:
To configure the user's VLAN:
DGS-3700-12:5#config wac user vlanid 100
Command: config wac user vlanid 100
Success.
DGS-3700-12:5#
show wac
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show WAC:
DGS-3700-12:5#show wac
Command: show wac
Web-Base Access Control
---------------------------------
State
Method
Redirect Path
Virtual IP
Switch HTTP Port
RADIUS Authorization
Local Authorization
DGS-3700-12:5#
show wac ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display WAC ports 1 to 3:
This command is used to change the VLAN associated with a user.
<username 15> - Specify the name of user account which will change its VID.
vlan - Specify the authentication VLAN name.
vlanid - Specify the authentication VLAN ID.
clear_vlan - Choose to clear the specified VLAN.
Only Administrator and Operator-level users can issue this command.
To display the WAC global setting.
show wac
This command is used to display the WAC global setting.
None.
None.
: Disabled
: Local
:
: 0.0.0.0
: 80 (HTTP)
: Enabled
: Enabled
To display WAC port information.
show wac ports {<portlist>}
This command is used to display WAC port information.
<portlist> - Specify a range of member ports to display the status.
None.
Page | 478