D-Link DGS-3700 Series Reference Manual page 522

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config cfm mep
Restrictions
Example usage:
To configure the CFM mep:
GS-3700-12:5#config cfm mep mepid 1 md 1 ma 1 state enable ccm enable
Command: config cfm mep mepid 1 md 1 ma 1 state enable ccm enable
Success.
DGS-3700-12:5#
delete cfm mep
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete CFM mep:
DGS-3700-12:5#delete cfm mep mepname mep1
Command: delete cfm mep mepname mep1
Success.
DGS-3700-12:5#
delete cfm ma
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a CFM ma:
be re-alarmed. The default value is 10 seconds
Only Administrator and Operator-level users can issue this command.
Used to delete a created MEP.
delete cfm mep [mepname <string 32> | mepid <int 1-8191> md <string 22> ma
<string 22>]
This command is used to delete a created MEP.
mepname – Specifies the MEP name. It's unique among all MEPs configured on the
device.
mepid – Specifies the MEP MEPID. It should be configured in MA's MEPID list.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Only Administrator and Operator-level users can issue this command.
Used to delete a created maintenance association.
delete cfm ma <string 22> md <string 22>
All MEPs created in the maintenance association will be deleted automatically.
md – Specifies the maintenance domain name.
ma – Specifies the maintenance association name.
Only Administrator and Operator-level users can issue this command.
Page | 522