D-Link DGS-3700 Series Reference Manual page 259

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
C
OMMAND
config stp mst_config_id
config stp mst_ports
show stp
show stp ports
show stp instance
show stp mst_config_id
Each command is listed, in detail, in the following sections.
enable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable STP, globally, on the Switch:
DGS-3700-12:5#enable stp
Command: enable stp
Success.
DGS-3700-12:5#
disable stp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable STP on the Switch:
DGS-3700-12:5#disable stp
Command: disable stp
Success.
DGS-3700-12:5#
config stp version
Purpose
Syntax
P
ARAMETERS
{revision_level <int 0-65535> | name <string>}
<portlist> instance_id <value 0-15> {internalCost [auto | value 1-200000000] |
priority <value 0-240>}
{<portlist>}
{<value 0-15>}
Used to globally enable STP on the Switch.
enable stp
This command allows the Spanning Tree Protocol to be globally enabled on the
Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to globally disable STP on the Switch.
disable stp
This command allows the Spanning Tree Protocol to be globally disabled on the
Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to globally set the version of STP on the Switch.
config stp version [mstp | rstp | stp]
Page | 259