D-Link DGS-3700 Series Reference Manual page 257

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show mld_snooping host
Description
Parameters
Restrictions
Example
To display the IP information of hosts:
DGS-3700-12:5#show mld_snooping host vlan default
Command: show mld_snooping host vlan default
VLAN ID : 1
Group : FF1E::1
Port : 2
Host : 2001::1
VLAN ID : 1
Group : FF1E::2
Port : 3
Host : 2001::1
VLAN ID : 1
Group : FF1E::3
Port : 4
Host : 2001::1
VLAN ID : 1
Group : FF1E::1
Port : 5
Host : 2001::2
Total Entries: 4
DGS-3700-12:5#
<portlist> | group <ipv6addr>]}
This command is used to display the MLD snooping host on the switch.
vlan - Specify the VLAN name. It belongs to the host information to be displayed.
vlanid - Specify the VLAN ID. It belongs to the host information to be displayed.
ports - Specify the port range. It belongs to the host information to be displayed.
group - Specify the group's IPv6 address. It belongs to the host information to be
displayed.
None.
Page | 257