D-Link DGS-3700 Series Reference Manual page 49

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
reboot
Syntax
Description
Parameters
Restrictions
Example usage:
To reboot:
>reboot
Command: reboot
Save current setting before system restart?(y/n)y
Please wait, the switch is rebooting...
reset account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset or delete an account:
>reset account
Command: reset account
Success
reset password
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reset the password:
>reset password
Command: reset password
Success
reboot { force_agree }
This command is used to exit the Reset Configuration Mode and restarts the switch.
And it pops out a confirmation message to save the current setting.
force_agree − If this parameter is specified, there will not be the prompt message to
ask for user's confirmation.
None.
Used to delete the created account.
reset account
This command is used to delete all of the created user accounts.
The banner messages for password recover mode is:
Password Recovery Mode
None.
This command is only available in password recovery mode.
Used to reset the password for user account
reset password {<username>}
This command is used to reset the password of the specified user to empty. If
username is not specified, password of all users will be reset.
None.
This command is only available in password recovery mode.
Page | 49