D-Link DGS-3700 Series Reference Manual page 493

Layer 2 managed gigabit ethernet switch
Hide thumbs Also See for DGS-3700 Series:
Table of Contents

Advertisement

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCP relay configuration:
DGS-3700-12G:5#show dhcp_relay
Command: show dhcp_relay
DHCP/Bootp Relay Status
DHCP/Bootp Hops Count Limit
DHCP/Bootp Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Remote ID : 00-21-91-AF-3C-07
Interface
Server 1
------------ --------------- --------------- --------------- ---------------
DGS-3700-12G:5#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DGS-3700-12G:5#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
DHCP/Bootp Relay Status
DHCP/Bootp Hops Count Limit
DHCP/Bootp Relay Time Threshold : 0
DHCP Vendor Class Identifier Option 60 State: Disabled
DHCP Client Identifier Option 61 State: Disabled
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Remote ID : 00-21-91-AF-3C-07
Interface
Server 1
------------ --------------- --------------- --------------- ---------------
DGS-3700-12G:5#
enable dhcp_relay
Purpose
Syntax
Used to display the current DHCP/BOOTP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
This command will display the current DHCP relay configuration for the Switch, or if
an IP interface name is specified, the DHCP relay configuration for that IP
interface.
ipif − The name of the IP interface for which to display the current DHCP relay
configuration.
None.
: Disabled
: 4
Server 2
: Disabled
: 4
Server 2
Used to enable the DHCP/BOOTP relay function on the Switch.
enable dhcp_relay
: Disabled
: Disabled
Server 3
: Disabled
: Disabled
Server 3
Page | 493
Server 4
Server 4

Advertisement

Table of Contents
loading

Table of Contents