D-Link DGS-3700 Series Reference Manual page 68

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#?
Command: ?
..
?
cable_diag ports
cfm linktrace
cfm loopback
clear
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear attack_log
clear cfm pkt_cnt
clear counters
clear ethernet_oam ports
clear fdb
clear historical_counters ports
clear igmp_snooping data_driven_group
clear igmp_snooping statistic counter
clear log
clear mac_based_access_control auth_mac
clear mld_snooping data_driven_group
clear mld_snooping statistic counter
clear port_security_entry
clear vlan_counter statistics
CTRL+C ESC q Quit
To display the parameters for a specific command:
DGS-3700-12:5#? config stp
Command: ? config stp
Command: config stp
Usage: {maxage <value 6-40>|maxhops <value 1-20> |hellotime <value 1-2>| forwarddelay
<value 4-30>|txholdcount <value 1-10>|fbpdu [enable|disable]|nni_bpdu_addr [dot1d |
dot1ad]}
Description: Used to update the STP Global Configuration.
config stp instance_id
config stp mst_config_id
config stp mst_ports
config stp ports
config stp priority
config stp version
DGS-3700-12:5#
config command_history
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
SPACE n Next Page
Used to configure the command history.
config command_history <value 1-40>
This command is used to configure number of the executed command to be recorded
in CLI.
<value 1-40> − The number of previously executed commands maintained in the
buffer. Up to 40 of the latest executed commands may be viewed.
None.
ENTER Next Entry a
Page | 68
All