D-Link DGS-3700 Series Reference Manual page 247

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
disable mld_snooping
Syntax
Description
Parameters
Restrictions
Example usage:
To disable MLD snooping on the switch:
DGS-3700-12:5#disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3700-12:5#
show mld_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show MLD snooping on the switch:
disable mld_snooping
This command is used to disable MLD snooping on the switch. Disabling MLD
snooping allows all MLD and IPv6 multicast traffic to flood within a given IPv6
interface.
None.
Only Administrator and Operator-level users can issue this command.
Used to the current status of MLD snooping on the switch.
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
This command is used to display the current MLD snooping configuration on the
switch.
vlan − The name of the VLAN for which you want to view the MLD snooping
configuration.
vlanid – The VIDs of the VLAN for which you want to view the MLD snooping
configuration.
If no parameter specified, the system will display all current MLD snooping
configurations.
None.
Page | 247