D-Link DGS-3700 Series Reference Manual page 72

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
C P
OMMAND
download sim_ms
upload sim_ms
Each command is listed, in detail, in the following sections.
enable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SIM on the Switch:
DGS-3700-12:5#enable sim
Command: enable sim
Success.
DGS-3700-12:5#
disable sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SIM on the Switch:
DGS-3700-12:5#disable sim
Command: disable sim
Success.
DGS-3700-12:5#
show sim
Purpose
Syntax
Description
ARAMETERS
hold_time <sec 100-255>]
[firmware_from_tftp | configuration_from_tftp] <ipaddr> <path_filename>
{[ members <mslist 1-32> | all]}
[configuration_to_tftp | log_to_tftp] <ipaddr> <path_filename> {[ members <mslist> |
all]}
Used to enable Single IP Management (SIM) on the Switch
enable sim
This command will enable SIM globally on the Switch. SIM features and functions
will not function properly unless this function is enabled.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable Single IP Management (SIM) on the Switch
disable sim
This command will disable SIM globally on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to view the current information regarding the SIM group on the Switch.
show sim {[ candidates { <candidate_id 1-100> } | members{ <member_id 1-32> }
| group {commander_mac <macaddr>} | neighbor]}
This command will display the current information regarding the SIM group on the
Switch, including the following:
Page | 72