D-Link DGS-3700 Series Reference Manual page 494

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
enable dhcp_relay
Description
Parameters
Restrictions
Example usage:
To enable DHCP relay:
DGS-3700-12:5#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3700-12:5#
disable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable DHCP relay:
DGS-3700-12:5#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3700-12:5#
config dhcpv6_relay hop_count
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the maximum hops of a DHCPv6 relay packet could be transferred to 4:
DGS-3700-12:5#config dhcpv6_relay hop_count 4
Command: config dhcpv6_relay hop_count 4
Success.
DGS-3700-12:5#
This command is used to enable the DHCP/BOOTP relay function on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the DHCP/BOOTP relay function on the Switch.
disable dhcp_relay
This command is used to disable the DHCP/BOOTP relay function on the Switch.
None.
Only Administrator and Operator-level users can issue this command.
Configure the DHCPv6 relay hop_count of the switch.
config dhcpv6_relay hop_count <value 1-32>
The command configures the DHCPv6 relay hop_count of the switch.
hop_count - Hop_count is the number of relay agents that have relayed this message.
The range is 1 to 32.
The default value is 4.
Only Administrator and Operator-level users can issue this command.
Page | 494