D-Link DGS-3700 Series Reference Manual page 108

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show lldp mgt_addr
Command: show lldp mgt_addr
Address 1 :
------------------------------------------------------
Subtype
Address
IF Type
OID
Advertising Ports
Total Entries : 1
DGS-3700-12:5#
show lldp remote_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LLDP information for remote ports 1 and 2:
DGS-3700-12:5#show lldp remote_ports 1-2
Command: show lldp remote_ports 1-2
Remote Entities Count : 0
DGS-3700-12:5#
show lldp statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display LLDP statistics:
To display the information learned from neighbors.
show lldp remote_ports {<portlist>} {mode [brief | normal | detailed]}
Use this command to display the information learned from the neighbor parameters.
<portlist> - Specify the ports to be displayed. When a port list is not specified,
information for all ports will be displayed.
mode - See below:
brief - Specify to display the information in brief mode.
normal - Specify to display the information in normal mode. This is the default
display mode.
detailed - Specify to display the information in detailed mode.
None.
To display the system LLDP statistics information.
show lldp statistics
Use this command to display an overview of neighbor detection activity on the switch.
None.
None.
: IPv4
: 10.19.72.38
: IfIndex
: 1.3.6.1.4.1.171.10.102.1.2
:
Page | 108