D-Link DGS-3700 Series Reference Manual page 271

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
To configure traffic control and enable broadcast storm control for ports 1-12:
DGS-3700-12:5#config traffic control 1-12 broadcast enable action shutdown threshold 1
countdown 10 time_interval 10
Command: config traffic control 1-12 broadcast enable action shutdown threshold 1
countdown 10 time_interval 10
Success.
DGS-3700-12:5#
show traffic control
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display traffic control settings:
DGS-3700-12:5#show traffic control
Command: show traffic control
Traffic Control Trap
Traffic Control Log
Traffic Control Auto Recover Time : 0 Minutes
Port Thres Broadcast Multicast Unicast
hold Storm
---- ----- --------- --------- -------- -------- -----
1 131072 Disabled
2 131072 Disabled
3 131072 Disabled
4 131072 Disabled
5 131072 Disabled
6 131072 Disabled
7 131072 Disabled
8 131072 Disabled
9 131072 Disabled
10 131072 Disabled
11 131072 Disabled
12 131072 Disabled
DGS-3700-12:5#
config traffic trap
Purpose Used to configure the trap settings for the packet storm control mechanism.
Syntax config traffic trap [none | storm_occurred | storm_cleared | both]
This command will configure how packet storm control trap messages will be used
Description
Used to display current traffic control settings.
show traffic control { <portlist> }
This command displays the current storm traffic control configuration on the Switch.
<portlist> − Used to specify port or list of ports for which to display traffic control
settings. The beginning and end of the port list range are separated by a dash.
None.
: [None]
: Enabled
Storm Storm
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
Disabled Disabled drop
when a packet storm is detected by the Switch. This function can only be used for
the software traffic storm control mechanism (when the action field in the config
traffic storm_control command is set as shutdown).
Action Count
Down
0
0
0
0
0
0
0
0
0
0
0
0
Page | 271
Time Shutdown
Interval Forever
-------- --------
5
5
5
5
5
5
5
5
5
5
5
5