D-Link DGS-3700 Series Reference Manual page 123

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12G:5#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host 4
IP Address
Severity
Facility
UDP port
Status
Total Entries : 1
DGS-3700-12G:5#
config log_save_timing
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure log_save_timing:
DGS-3700-12:5#config log_save_timing on_demand
Command: config log_save_timing on_demand
Success.
DGS-3700-12:5#
show log_save_timing
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show log_save_timing:
: 10.73.60.123
: Emergency(0)
: Local0
: 514
: Disabled
Used to configure the method to save log.
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
This command is used to set the method to save log.
time_interval − save log to flash every xxx minutes. (if no log happen in this period,
don't save)
on_demand − save log to flash whenever user type "save log" or "save all" This is also
the default.
log_trigger − save log to flash whenever log arrives
Only Administrator and Operator-level users can issue this command.
Used to show the timing method to save log.
show log_save_timing
This command is used to show method to save log.
None.
None.
Page | 123