D-Link DGS-3700 Series Reference Manual page 238

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config mld_snooping multicast_vlan_group_profile
Restrictions
Example usage:
To add FF12::1 to FF12::2 to MLD multicast VLAN group profile "g1":
DGS-3700-12:5#config mld_snooping multicast_vlan_group_profile g1
add FF12::1-FF12::2
Command: config mld_snooping multicast_vlan_group_profile g1 add
FF12::1-FF12::2
Success.
DGS-3700-12:5#
delete mld_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the MLD multicast VLAN group profile "g1":
DGS-3700-12:5#delete mld_snooping multicast_vlan_group_profile profile_name g1
Command: delete mld_snooping multicast_vlan_group_profile profile_name g1
Success.
DGS-3700-12:5#
show mld_snooping multicast_vlan_group_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MLD multicast VLAN group profile:
<mcastv6_address_list> – Specifies the MLD multicast addresses to be configured. It
can be a continuous single multicast addresses, such as FF12::1, FF12::3, FF12::8,
or a multicast address range, such as FF12::1- FF12::12, or both of them, such as
FF12::1, FF12::18- FF12::20.
Only Administrator and Operator-level users can issue this command.
Used to delete an MLD multicast VLAN group profile on the switch.
delete mld_snooping multicast_vlan_group_profile [profile_name <profile_name
1-32> |all]
This command deletes an MLD multicast VLAN group profile on the switch.
<profile_name 32> − Specifies the MLD multicast VLAN profile name, max length
is 32.
all – All MLD multicast VLAN group profile will be deleted.
Only Administrator and Operator-level users can issue this command.
Used to view an MLD multicast VLAN group profile on the switch.
show mld_snooping multicast_vlan_group_profile {<profile_name 1-32>}
This command displays an MLD multicast VLAN group profile on the switch.
{<profile_name 32>} − Specifies the MLD multicast VLAN profile name, max length
is 32. If not specified, all MLD multicast VLAN group profiles will be displayed.
Only Administrator and Operator-level users can issue this command.
Page | 238