D-Link DGS-3700 Series Reference Manual page 97

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config lldp ports
ipv4 - Specify the IP address of IPv4.
ipv6 - Specify the IP address of IPv6.
enable - Enable port(s) specified for advertising indicated management address
instance.
disable - Disable port(s) specified for advertising indicated management address
instance.
basic_tlvs - Configure an individual port or group of ports to include one or more of
optional TLV data types from outbound LLDP advertisements.
all - Configure all four TLV data types listed below.
port_description - This TLV optional data type indicates that LLDP agent should
transmit "Port Description TLV" on the port. The default state is disabled.
system_name - This TLV optional data type includes indicates that LLDP agent
should transmit "System Name TLV." The default state is disabled.
system_description - This TLV optional data type includes indicates that LLDP
agent should transmit "System Description TLV." The default state is disabled.
system_capabilities - This TLV optional data type includes indicates that LLDP
agent should transmit "System Capabilities TLV." The system capability will
indicate whether the device provides repeater, bridge, or router function, and
whether the provided functions are currently enabled. The default state is
disabled.
enable - Enable configuration of an individual port or group of ports to include one or
more of optional TLV data types from outbound LLDP advertisements.
disable - Disable configuration of an individual port or group of ports to include one
or more of optional TLV data types from outbound LLDP advertisements.
dot1_tlv_pvid - This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN ID TLV transmission is allowed on a given
LLDP transmission capable port. The default state is disabled.
enable - Enable port VLAN ID TLV transmission on a given LLDP transmission
capable port.
disable - Disable port VLAN ID TLV transmission on a given LLDP transmission
capable port.
dot_tlv_protocol_vid - This TLV optional data type determines whether the IEEE
802.1 organizationally defined port and protocol VLAN ID TLV transmission is
allowed on a given LLDP transmission capable port. The default state is disabled.
vlan - Specify a VLAN to be transmitted.
all - Specify that all VLAN names will be transmitted.
<vlan_name 32> - Specify a VLAN name to be transmitted.
vlanid - Specify a VLAN ID list to be transmitted.
enable - Enable configuration of an individual port or group of ports to include one or
more of IEEE 802.1 Organizationally port and protocol VLAN ID TLV data types
from outbound LLDP advertisements.
disable - Disable configuration of an individual port or group of ports to include one
or more of IEEE 802.1 Organizationally port and protocol VLAN ID TLV data
types from outbound LLDP advertisements.
dot1_tlv_vlan_name - This TLV optional data type indicates whether the
corresponding Local System's VLAN name instance will be transmitted on the
port. If a port is associated with multiple VLANs, those enabled VLAN ID will be
advertised.The default state is disabled.
vlan - Specify a VLAN to be transmitted.
all - Specify that all VLAN names will be transmitted.
Page | 97