D-Link DGS-3700 Series Reference Manual page 118

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the Syslog function on the Switch:
DGS-3700-12:5#enable syslog
Command: enable syslog
Success.
DGS-3700-12:5#
disable Syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
DGS-3700-12:5#disable syslog
Command: disable syslog
Success.
DGS-3700-12:5#
show syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current status of the syslog function:
Used to enable the system log to be sent to up to 4 remote hosts.
enable syslog
This command is used to enable the system log to be sent to up to 4 remote hosts.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable the system log to be sent to up to 4 remote hosts.
disable Syslog
This command is used to disable the system log to be sent to up to 4 remote hosts.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the syslog protocol status as enabled or disabled.
show syslog
This command is used to display the syslog status as enabled or disabled.
None.
None.
Page | 118