D-Link DGS-3700 Series Reference Manual page 452

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Example usage
To disable the configuration authorized from the local database:
DGS-3700-12:5#config mac_based_access_control authorization attributes local disable
Command: config mac_based_access_control authorization attributes local disable
Success.
DGS-3700-12:5#
show mac_based_access_control auth_state ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display MAC-based access control authentication MAC information:
DGS-3700-12:5#show mac_based_access_control auth_state ports
Command: show mac_based_access_control auth_state ports
(P):Port based
Port MAC Address
----- -----------------
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
DGS-3700-12:5#
config mac_based_access_control log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To disable log state of MAC-based Access Control:
To display MAC-based access control authentication MAC information.
show mac_based_access_control auth_state ports {<portlist>}
This command is used to display MAC-based access control authentication MAC
information.
<portlist> - Specify the ports to be displayed.
None.
State
------------- ---- --------- ------------
: 0
: 0
: 0
This command is used to enable or disable generating of MAC-based Access Control
logs.
config mac_based_access_control log state [enable | disable]
This command is used to enable or disable generating of MAC-based Access Control
logs.
enable - Enable log for MAC-based Access Control. The log of MAC-based Access
Control will be generated.
disable - Disable log for MAC-based Access Control.
Only Administrator and Operator-level users can issue this command.
VID Priority Aging Time/
Block Time
Page | 452