D-Link DGS-3700 Series Reference Manual page 124

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show log_save_timing
Command: show log_save_timing
Saving Log Method: On_demand
DGS-3700-12:5#
show attack_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show dangerous messages on master:
DGS-3700-12:5#show attack_log
Command: show attack_log
Index Time
---- ---------------
2 00000 days 01:25:43
1 00000 days 01:25:43
DGS-3700-12:5#
clear attack_log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the master's dangerous log:
DGS-3700-12:5#clear attack_log
Command: clear attack_log
Success.
DGS-3700-12:5#
upload attack_log_to TFTP
Purpose
Syntax
Used to show dangerous log messages.
show attack_log {index <value_list>}
This command is used to show content of dangerous log messages.
value_list X-Y − The show log command will display the dangerous log messages
between the log number of X and Y. For example, show dangerous log index 1-5
will display the dangerous log messages from 1 to 5.
If no parameter specified, all dangerous log entries will be displayed.
None.
Log Text
-----------------------
Possible spoofing attack from 000d01002301 port 6
Possible spoofing attack from 000d01002301 port 6
Used to clear the switch's dangerous log.
clear attack_log
This command is used to clear the switch's dangerous log.
None.
Only Administrator and Operator-level users can issue this command.
Used to upload the switch's dangerous log.
upload attack_log_toTFTP [<ipaddr> |<ipv6addr>] dest_file <path_filename
64> ]
Page | 124