D-Link DGS-3700 Series Reference Manual page 126

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
config system_severity
Restrictions
Example usage:
To configure the system severity settings:
DGS-3700-12:5#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3700-12:5#
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the system severity settings for critical traps and log:
DGS-3700-12:5#show system_severity
Command: show system_severity
System Severity Trap : information
System Severity Log : information
DGS-3700-12:5#
Only Administrator and Operator-level users can issue this command.
To display system_severity level of an alert required for log entry or trap message.
show system_severity
This command is used to display system_severity level of an alert required for log
entry or trap message.
None.
None.
Page | 126