D-Link DGS-3700 Series Reference Manual page 321

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3700-12:5#show voice_vlan oui
Command: show voice_vlan oui
OUI Address
------------------
00-01-E3-00-00-00
00-03-6B-00-00-00
00-09-6E-00-00-00
00-0F-E2-00-00-00
00-60-B9-00-00-00
00-D0-1E-00-00-00
00-E0-75-00-00-00
00-E0-BB-00-00-00
Total Entries: 8
DGS-3700-12:5#
show voice_vlan ports
To display port voice VLAN information.
Purpose
Syntax show voice_vlan ports {<portlist>}
Description This command is used to display port voice VLAN information.
Parameters <portlist> - Specify a range of ports to display. If all is specified, all port voice VLAN
None.
Restrictions
Example usage:
To display voice VLAN ports 1 to 3:
DGS-3700-12:5#show voice_vlan ports 1-3
Command: show voice_vlan ports 1-3
Ports Status
----- ---------
1 Disabled
2 Disabled
3 Disabled
DGS-3700-12:5#
show voice_vlan voice_device ports
Purpose To display voice VLAN devices that are connected to ports.
Syntax show voice_vlan voice_device ports {<portlist>}
Description This command is used to show voice devices that are connected to the ports. The start
<portlist> - Specify a range of ports to display. If all is specifiedl, the system will
Parameters
None.
Restrictions
Example usage:
To display voice VLAN device ports 1 to 2:
Mask
-----------------
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
information will be displayed.
Mode
--------
Auto
Auto
Auto
time is the time when the device is detected on this port and the activate time is the
latest time when the device sends the traffic.
display the connected Voice device of all ports
Description
---------------
Siemens
Cisco
Avaya
Huawei&3COM
NEC&Phillips
Pingtel
Veritel
3COM
Page | 321