D-Link DGS-3700 Series Reference Manual page 314

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
delete vlan_counter
Description This command deletes the control entry for VLAN traffic flow statistics.
all – Specifies to delete all VLAN statistic control entries.
Parameters
vlan_name – Specifies the VLAN name.
vidlist – Specifies a list of VLANs by VLAN ID.
ports <portlist> – To disable to count statistics by specific port on specific VLAN.
all_frame – The statistics will be stop counting for all packets.
broadcast – Specifies to stop counting broadcast packets
multicast – Specifies to stop counting multicast packets
unicast – Specifies to stop counting unicast packets
packet – Specifies to stop counting at packet level.
byte – Specifies to stop counting at byte level.
Only Administrator and Operator-level users can issue this command.
Restrictions
Example usage:
To stop counting packet levels for all packets on VLAN 1:
DGS-3700-12:5#delete vlan_counter vlanid 1 all
Command: delete vlan_counter vlanid 1 all
Success.
DGS-3700-12:5#
clear vlan_counter statistics
Purpose Used to clear statistics gathered by the VLAN counter.
Syntax clear vlan_counter statistics [all | [vlan <vlan_name> | vlanid < vidlist >] [all |
This command is used to clear statistic gathered by the VLAN counter.
Description
Parameters all – Specifies to clear all VLAN statistics
vlan_name – Specifies the VLAN name.
vidlist – Specifies a list of VLANs by VLAN ID.
ports <portlist> – To clear to count statistics by specific port on specific VLAN.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To clear statistics for VLAN 1-10:
DGS-3700-12:5#clear vlan_counter statistics vlanid 1-10 port 1-3
Command: clear vlan_counter statistics vlanid 1-10 port 1-3
Success.
DGS-3700-12:5#
show vlan_counter
Purpose This commands displays the statistic control entries created for VLANs.
Syntax show vlan_counter {[vlan <vlan_name> | vlanid < vidlist > ]}
This commands displays the statistic control entries created for VLANs.
Description
<portlist> [all | [all_frame | broadcast | multicast | unicast][packet | byte] ] ] ]
ports <portlist>]]
Page | 314